Before you have a roofer in Orlando install a new roof, you need to think about how to mitigate wind damage to it during a storm. The process of installing a new roof that is wind resistant starts with choosing the right roofing material. There are several choices on the market that are designed to handle wind above 100 miles an hour.
Dimensional shingles, sometimes called architectural shingles, are stronger than the three-tab shingles that homeowners use in many parts of the country. Most are rated to withstand winds up to 110 miles an hour. At the same time, it is essential that your roofer in Orlando use the correct techniques to put these roofs on your home. They should be nailed in place with six nails as opposed to the standard four. Additionally, the roofer should use more nails and glue to hold ridge shingles in place. Moreover, they should use roof cement strategically across the roof.
Standing seam metal roofs have very few pieces, so there are fewer places that the wind can get to lift off your roof. Additionally, the seams on these roofs are designed to stay above the water level, even in torrential downpours. Some of these thick metal roofs can withstand wind speeds up to 160 miles per hour.
This roofing is available in four different profiles, including shake, tile, barrel tile, and shingle. You can find it with a wind rating up to 120 miles per hour, and it is available in over 20 different colors. Manufacturers make this steel roofing by covering it with a multitude of little stones. Consider options where hail protection is in the warranty.
Metal roof shingles are a great choice on roofs that have a 5/12 or better pitch. The fasteners are below the shingles helping to stop them from getting uplifted during a windstorm. You can find options that look like wood shakes and tiles. It is vital, however, to choose a high-quality underlayment. While manufacturers rate many metal roof shingles to withstand winds over 110 miles per hour, look at the uplift resistance of the metal roof shingles before making a final buying decision. Consider options made from 24 or 26-gauge steel as they offer more protection than other options on the market.
Choosing the right roofing materials for your home or business can be tough. One decision, however, is incredibly simple. The best roofers in Orlando work for JV Contractors, LLC. These roofing contractors in Orlando have many years of experience, and they will be glad to give you an estimate on your next roofing job. They are fully licensed and bonded so that you can trust these professionals just like your friends and family have for many years.